Equus 3620 - Vacuum / Carburetor Fuel Pressure Tester Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Instruments de mesure Equus 3620 - Vacuum / Carburetor Fuel Pressure Tester. Equus 3620 - Vacuum / Carburetor Fuel Pressure Tester User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
OPERATING INSTRUCTIONS
#3620
IEC 1997
IEC 1997
ABOUT THIS TOOL
The Vacuum Gauge provides an easy and efficient
means of checking engine vacuum or testing fuel
pump operation.
NOTE: This gauge has been calibrated for use at
sea level. When using the gauge at alti-
tudes above sea level, you MUST correct
the gauge indication to its true value at sea
level by adding one in. Hg for each 1,000
feet above sea level.
For example: An indication of 19 in. Hg at 2,000
feet above sea level would be adjusted to 21 in. Hg
(true value at sea level).
CHECKING VACUUM
Checking Vacuum at Engine Idle
NOTE: Refer to your vehicle's service manual to
obtain the manufacturer's specifications
for vacuum.
1. MAKE SURE the ignition is off.
2. Locate a vacuum hose which is connected
directly to the intake manifold. Disconnect the
vacuum hose and connect the gauge in its place.
3. Start engine and idle.
4. Note the value of vacuum and compare this
value to the manufacturer's specifications.
If vacuum indication is LOWER than specified,
check for the following:
Incorrect ignition timing
Incorrect valve timing or adjustment
Incorrect idle mixture screw adjustment
Worn piston rings (cylinder compression)
Intake manifold vacuum leaks
TO INTAKE
MANIFOLD
VACUUM HOSE
IEC
Vue de la page 0
1 2

Résumé du contenu

Page 1 - CHECKING VACUUM

OPERATING INSTRUCTIONS#3620IEC 1997IEC 1997ABOUT THIS TOOLThe Vacuum Gauge provides an easy and efficientmeans of checking engine vacuum or testing

Page 2 - CHECKING FUEL PUMP OPERATION

If vacuum indication OSCILLATES SLOWLY,check for incorrect idle mixture screw adjust-ment.If vacuum indication OSCILLATES RAPIDLY,check for the follow

Commentaires sur ces manuels

Pas de commentaire