Equus 3160 - ABS/SRS + OBD2 Scan Tool Manuel d'utilisateur télécharger pdf (Page 54)

Live Data Mode

RECORDING (CAPTURING) LIVE DATA

52 OBD2

2. Use the UP and DOWN buttons,

as necessary, to highlight “Live Data

Menu”, then press the ENTER/LD

button.

 The "Live Data Menu" displays.

3. Use the UP

and DOWN buttons,

as necessary, to highlight “Record Live

Data”, then press the ENTER/LD

button.

 The "Record Live Data Menu" dis-

plays.

4. Use the UP

and DOWN buttons,

as necessary, to highlight “Record by

manual trigger”, then press the

ENTER/LD button.

5. When the "Record by Manual Trigger" screen displays, select the

desired trigger point as follows:

The Scan Tool is capable of recording approximately 20

frames of Live Data. Record by DTC trigger lets you select the

point in time at which you wish the Scan Tool to begin

recording Live Data. You can set the trigger point to record the

20 frames of data before an event (when the DTC was set),

after the event, or in the middle (10 frames before and 10

frames after the event.

 Beginning - records approximately

20 frames of Live Data after the

ENTER/LD

button was pressed.

 Middle - records approximately 10

frames of Live Data before and 10

frames after the ENTER/LD

button was pressed.

 End - records approximately 20 frames of Live Data before the

ENTER/LD

button was pressed.

6. Use the UP

and DOWN buttons, as necessary, to select the

desired trigger point, then press the ENTER/LD

button.

 A "One moment please. . ."

message shows on the display.

When the Scan Tool is ready to

record Live Data, the "Record Live

Data" screen displays.

7. Put the engine in the operating condition

where the problem manifests itself.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 71 72

Commentaires sur ces manuels

Pas de commentaire

Equus 3160 - ABS/SRS + OBD2 Scan Tool Manuel d'utilisateur Page 54

Commentaires sur ces manuels